Liquid concentrate containing aldehyde for environmental hygiene of medical products and surfaces of all types. High level of disinfection safety on all washable surfaces, especially suitable in risk areas. Bactericidal, yeasticidal, tuberculocidal and virucidal as per RKI recommendation of 01/2004 (DVV 2008). RKI-listed (A, B).
Broad antibacterial spectrum (incl. MRSA, TB) and effective against yeasts. Virucidal to a limited degree (incl. HIV, HBV, HCV) and virucidal. High level of disinfection safety on all washable surfaces, especially suitable in risk areas.
|Our performance||Your advantage|
|Reliable disinfection||RKI-listed for surface and laundry disinfection, can be used for reportable communicable diseases|
|Safe use||Tested virucidal disinfection|
|Can be used in risk areas||Product switch is not necessary in the event of an outbreak|
|Material compatibility has been thoroughly tested||Can be used for:
metals (e.g. brass),
plastics (e.g. polycarbonate),
elastomers (e.g. EPDM),
floors (e.g. linoleum)
Prepare application solution by diluting with water (max. 30 °C) to the desired concentration.
Wide down the surfaces to be treated so they are wet. Make sure of even coverage of wetness.
Protective gloves must be worn as per UVV.
Disinfectants containing amine or amine derivatives cannot be used alternately with disinfectants containing aldehyde. Thorough interim cleaning is required for any switch.
Use biocides with caution.
Always read the certification marking and the product information before use.
100g contain the following active agents:
12g glyoxal, 11.1g formaldehyde, 3.75g glutaral, 2.7g benzalkonium chloride, 1g polyhexamethylene biguanide
|Use (after commencement)||Shelf life|
||The same workday|
Please note the following to ensure the correct storage of environmental hygiene and instrument disinfectants: The original containers (canisters, buckets or bottles) with the disinfectant concentrate (or powder) should be stored at temperatures below 25°C and kept dry and clean. A brief period below or above the given storage temperature (e.g. during transport) will not diminish the effectiveness.
The containers are to be sealed tightly after each use. Please also take care that the concentrate remaining in the container is not contaminated when preparing the application solution.
Assuming that the application solution that is produced is not contaminated by organic material, it is to be stored in a clean, closed container or a covered instrument basin.
Please take note of the corresponding marking on the containers in which the disinfectant solutions are kept, e.g. contents, concentration, date, shelf life and batch number. Used and organically contaminated solutions are to be changed at least once per workday as per RKI recommendation.