For disinfection of medical instruments, anesthesia material and endoscopes. Effective against bacteria (incl. TB) and yeasts Virucidal according to RKI recommendation of 01/2004 (DVV 2008). RKI-listed (A).
Specially suitable for thermolabile material.
|Our performance||Your advantage|
|VAH and RKI listed||Safety for the user|
|Powerful composition of agent||Short contact times and low usage concentration, the proven solution for terminal disinfection of thermolabile instruments|
|Low application concentrations||High degree of efficiency|
For terminal disinfection of medical instruments made from metal, plastic, glass etc. Specially suitable for thermolabile material that can be disinfected, but not sterilized, e.g. anesthesia accessories, TEE and ultrasonic probes.
Preparing the disinfectant solution by diluting with water (max. 25°C). Place instruments in the Sekusept™ forte solution after completing cleaning and intermediate rinsing. Ensure complete wetting. After the stated contact time, remove the instruments from the solution and rinse with water of at least drinking quality (better with sterile distilled water or fully demineralized water).
Afterwards dry outer surfaces subsequently, particularly the cavities (e.g. in endoscope channels).
Please also follow the reprocessing recommendations of the instrument manufacturer.
Service life of unloaded application solution in covered instrument basin: 14 days
A loaded application solution is to be made fresh every working day according to the RKI recommendation.
100g contains as agents:
11.1g formaldehyde, 12g glyoxal, 3.75g glutaral, 2.7g benzalconium chloride
|Use (after commencement)||Shelf life|
Please note the following to ensure the correct storage of environmental hygiene and instrument disinfectants: The original containers (canisters, buckets or bottles) with the disinfectant concentrate (or powder) should be stored at temperatures below 25°C and kept dry and clean. A brief period below or above the given storage temperature (e.g. during transport) will not diminish the effectiveness.
The containers are to be sealed tightly after each use. Please also take care that the concentrate remaining in the container is not contaminated when preparing the application solution.
Assuming that the application solution that is produced is not contaminated by organic material, it is to be stored in a clean, closed container or a covered instrument basin.
Please take note of the corresponding marking on the containers in which the disinfectant solutions are kept, e.g. contents, concentration, date, shelf life and batch number. Used and organically contaminated solutions are to be changed at least once per workday as per RKI recommendation.